This installer allows the Connection Center App to detect the SleepSat when it is turned on and plugged into the computer. Click on the attachment below to download and install.

For SleepSat oximeters:

For Minolta 300i oximeters:

AND driver installer

SleepSat Provider Guide - This guide will walk you through the steps to install Connection Center and get started.  Click on the attachment to download.  


Note: The SleepSat Device Installer is automatically included in the SatScreen Connection Center App installation. If you are a first time user, we recommend you refer to the SleepSat Provider's Guide for instructions on setting up the device and installing and using the SatScreen Connection Center app.  We also have a series of set-up videos available at

You should only need to install this SleepSat Device Installer separately if the initial installation is interrupted/canceled or otherwise failed, your system has been updated, or if you continue to see a "Waiting for Device, Not Connected" message despite the SleepSat being connected and fully charged.